Cast Aluminum Battery Boxes

Short Description:

Die-casting and extrusion are commonly used in the production of aluminum alloy housing. The housing can be molded in one piece (flatness and accuracy are affected to a certain extent, especially if the installation interface has sealing requirements, it may require post-processing to modify), do not need welding, need large tonnage die-casting machine to achieve, generally subject to size restrictions, housing size will not be too large, usually used for battery tray, you can increase the tailor-welded process to compensate if the size of housing is too large.

Send email to us

Product Detail

Product Tags

✧ Product Introduction

Cast Aluminum Battery Boxes

In addition to the lightweight of the body structure, the battery pack itself also needs to be lightweight. The lightweight of the battery housing is one of the directions of efforts.

Especially for battery packs of pure electric vehicles, the pursuit of high mileage on the premise of the current lithium-ion battery level of development will inevitably require that the weight of the battery case be reduced as much as possible while ensuring high structural strength, the weight of the battery pack can be reduced about 10-30% by using light aluminum alloy than by using steel, which can reduce the overall weight of the battery pack to some extent.

✧ Products Description

Mold Material	SKD61, H13
Cavity	Single or multiple
Mold Life Time	50K times
Product Material	1) ADC10, ADC12, A360, A380, A413, A356, LM20, LM24 2) Zinc alloy 3#, 5#, 8#
Surface Treatment	1) Polish, powder coating, lacquer coating, e-coating, sand blast, shot blast, anodine 2) Polish + zinc plating/chrome plating/pearl chrome plating/nickel plating/copper plating
Size	1) According to customers' drawings 2) According to customers' samples
Drawing Format	step, dwg, igs, pdf
Certificates	ISO 9001:2015 & IATF 16949
Payment Term	T/T, L/C, Trade Assurance