Precise BLDC Motor

Short Description:

This W86 series brushless DC motor(Square dimension: 86mm*86mm) applied for rigid working circumstances in industrial control and commercial use application. where high torque to volume ratio is needed. It is a brushless DC motor with outer wound stator, rare-earth/cobalt magnets rotor and Hall effect rotor position sensor. Peak torque obtained on the axis at nominal voltage of 28 V DC is 3.2 N*m (min). Available in different housings,Is conform to MIL STD. Vibration toleration: according to MIL 810. Available with or without tachogenerator, with sensitivity according to customer requirements.

Product Detail

Product Tags

✧ Product Introduction

W86 series product is a compact high efficient brushless DC motor, magnet made by NdFeB(Neodymium Ferrum Boron) and high standard magnets imported from Japan as well as the higher standard stack lamination, which greatly improve the motor performances comparing to others available motors in the market.


Comparing to conventional dc motors, significant advantages as below:

1. Better speed-torque characteristics

2. Fast dynamic response

3. No noise in operation

4. Long service lifespan over 20000hrs.

5. Large speed range

6. High efficiency

✧ General Specification:

Typical Voltage: 12VDC,24VDC,36VDC,48VDC,130VDC

Output Power Range: 15~500 watts

Duty Cycle: S1, S2

Speed Range: 1000rpm to 6,000 rpm

Ambient Temperature: -20°C to +40°C

Insulation Grade: Class B, Class F, Class H

Bearing Type: SKF/NSK ball bearings

Shaft material: #45 Steel, Stainless Steel, Cr40

Housing surface treatment options: Powder Coated, Painting

Housing Selection: Air Ventilated, IP67,IP68

EMC/EMI Requirement: According to customer’s demand.

RoHS Compliant

Certification: CE, built by UL standard.

✧ Application

Kitchen equipment, data processing,engine, clay trap machines,medical laboratory equipment,Satellite communication,fall protection,crimping machines


✧ Application


✧ Typical Performance







 Rated Voltage

130 VDC

No-load speed

90 RPM

Rated torque


Rated speed

78 RPM

Max. torque

120 N.m

Rated current


Insulation class





1. What are your prices?

Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.

2.Do you have a minimum order quantity?

Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense. 

3.Can you supply the relevant documentation?

Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

4.What is the average lead time?

For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

5.What kinds of payment methods do you accept?

You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.

  • Previous:
  • Next:

  • Write your message here and send it to us